WHAT PROTECTIVE CLOTHING FOR WELDERS MUST DO
The requirements for the right protective clothing for welders are just as high as the dangers involved. To protect you from molten or glowing spatter, your clothing must be able to withstand a lot.
- The upper and lower body, neck, arms and legs must be covered at all times to prevent hot particles from flying around. This means that any pockets in the welding workwear must also be covered so that no splashes can get into them. Care must also be taken during manufacture to ensure that there are no electrically conductive connections between the inside and outside of the protective clothing for welders.
- At temperatures of more than 1,000°C, the welder's workwear must not only protect you, but also be designed to withstand the stresses and strains - because the clothing should not only provide one-off protection, but also last for a long time, even in tough applications.
- To ensure that protective clothing for welders can fulfil all its tasks, it all starts with the right fabric. BP uses an inherent flame-retardant solution which, unlike impregnated cotton, offers permanent protection - even after many washes.
- In addition, inner cuffs ensure that the skin is protected from UV exposure even during delicate work. Despite the protective functions, comfort naturally also plays an important role in workwear for welders.An ergonomic cut and arm lift system ensure sufficient freedom of movement in every situation and a secure fit, even when stretching.The right fabric mix is not only soft and comfortable against the skin, but is also breathable and dries quickly. And the look should not be neglected either: That's why BP's PPE for welders has a slim silhouette, which is otherwise more familiar from sportswear or leisurewear.
Doing our part
Contact us
- Mon-Thu, 8 am - 5 pm / Fri 8 am - 4 pm
- info@bp-online.com
- Domstraße 55-73 (im carré domstrasse), D-50668 Köln